Archived Pda short cuts

[fun at target]

I know some but what others are there is i dont have to go through all the pages on the pda to find the features i need

 

[see spot save]

STO - backstocking
PULL - pulling batches
LOCU - clearing locations in the backroom
BCODE - printing barcodes for backstocking
MSPK - for reporting DC mispicks

Little round green button to the left, by/under the arrow keys will allow you to toggle between two RF APPs

 

[qmosqueen]

Blue button on right CTL on left twice will bring up a small pop up screen Click or arrow down to exit for quick reboot log out

 

[fun at target]

Well the pulling batches one be the same as pulling individual iteims

 

[smashandthrash]

You can print barcodes on the pda's again?

 

[Circle9]

Those arrow keys just below the screen? Left for (R)eturn and right for (C)ontinue. Blew my mind when I found out.

 

[mystique199]

You can print barcodes on the pda's again?

Yuppers!! They actually added it back fairly quickly

 

[smashandthrash]

Yuppers!! They actually added it back fairly quickly

Baller

 

[SrTLall]

Well the pulling batches one be the same as pulling individual iteims

Pulling single items is an entirely different app - SUBT.

 

[Circle9]

Yuppers!! They actually added it back fairly quickly

Wait, is it all label printing or just BCODE?

 

[mystique199]

Wait, is it all label printing or just BCODE?

Just bcode in rfapps. Labels only on my device 🙁

 

[Hardlinesmaster]

You used numbers too.
Sto - 1, then 1 again
Work batches - 2, then 1. Pick a number type of batch.
Subt is under the main apps.
Barcode - 1, then 6. Select a number UPC label type.

 

[CrimsonRaven712]

BRLM- used for printing shelf/waco labels

 

[Cee Low]

Want to reset the screen calibration? blue button + ESC

Having connection problems or just want a hard reset without rebooting? blue button + ctrl + blue button + ctrl /// down arrow twice and "exit"

😱

 

[qmosqueen]

Shortcut when not working toss pda on the floor watch it bounce it is made with Rubbermaid.

 

[Circle9]

Want to reset the screen calibration? blue button + ESC

Having connection problems or just want a hard reset without rebooting? blue button + ctrl + ctrl /// down arrow twice and "exit"

😱

I'm going to have to remember that first trick next time I go in. Maybe it'll help with the "click twice on everything" problem I get all the time with Receive.

Shortcut when not working toss pda on the floor watch it bounce it is made with Rubbermaid.

Not going to lie, when I've felt especially frustrated I've dropped the PDA from waist or shoulder height and watched it bounce. Can't do that with a MyDevice!

 

[CrimsonRaven712]

Shortcut when not working toss pda on the floor watch it bounce it is made with Rubbermaid.

I dropped mine once from almost as high as the wave could go up. Thought I was gonna get fired to breaking a device but that freaking thing just bounced a bit and kept on working.

 

[redeye58]

that freaking thing just bounced a bit and kept on working.

We called that a 'hard' reboot.

 

[SFSFun]

I'm going to have to remember that first trick next time I go in. Maybe it'll help with the "click twice on everything" problem I get all the time with Receive.


Not going to lie, when I've felt especially frustrated I've dropped the PDA from waist or shoulder height and watched it bounce. Can't do that with a MyDevice!

I think receive is just built that way for some stupid reason. I usually click once, wait about half a second, then click again.

 

[ISMike]

Want to reset the screen calibration? blue button + ESC

Having connection problems or just want a hard reset without rebooting? blue button + ctrl + blue button + ctrl /// down arrow twice and "exit"

😱

Resetting the calibration that way will be a godsend instead of hard rebooting to get back to it!
Just restarting the main portion of the app I don't think you need to do it twice, just the 2 buttons at the same exact time. I'm pretty sure I seem to get it on the first try sometimes, other times second, etc.

 

[SFSFun]

To calibrate the screen, I usually just log out and then hit the cancel button from the login screen.

 

[SrTLall]

Sort of related: are anyone else's PDAs taking unusally long to load recently? Between logging in, getting to the main app screen, and starting apps, the load time takes forever these days. Maybe I need to mySupport our connectivity. I know we are in the middle of our network upgrades, but I thought PDAs run off of RF, not the network.

 

[RunForACallBox]

CTRL + Red dot button makes the laser more sensitive at reading barcodes. Doesn't have to be 100% pointed on it to pick it up. I refuse to use it the normal way.

 

[Cee Low]

Sort of related: are anyone else's PDAs taking unusally long to load recently? Between logging in, getting to the main app screen, and starting apps, the load time takes forever these days. Maybe I need to mySupport our connectivity. I know we are in the middle of our network upgrades, but I thought PDAs run off of RF, not the network.

Here recently the "My Home" screen take a while to load. It's the screen right after you verify your role. To skip it just spam the "Toggle" button down on the bottom of the touch screen after you hit "Yes" on your role. It should make it quicker to get to RFapps or myFA.

 

[SFSFun]

The myhome app was deleted from our PDAs, so it loads super quick now.