MEGATHREAD Signing Tips, Tricks and Quips (along with howls of despair)

Alexbegt said:
Be on the lookout for new ISM for command strips - we set ours before it came in and had to go back to put up the new backer paper and signage.

3M also shorted us the peg label holders with tape on them so I had to make it work.

Now only if they would send us the trays for the bottom shelf since ours have been missing forever
Click to expand...
Check with receiver ups or FedEx delivered it Monday
 
We finished storage set last night minus the endcaps for 6/15 - I don’t get why laminate storage 2 (RE) set as a new POG full of clearance. Almost every item was on clearance.

Now the pain will be once the displays start rolling in that my store does not misplace them
 
FlowTeamChick said:
Why are your price labels showing the figures in the yellow boxes? Our price labels are just the white part. Or the yellow part on some of them - whichever is the lower, actual selling price.
Click to expand...

Some states require all retailers to show a unit of measurement price on every item. It results in some strange labels such as 509.50 per 100 command hooks.
 
FlowTeamChick said:
Why are your price labels showing the figures in the yellow boxes? Our price labels are just the white part. Or the yellow part on some of them - whichever is the lower, actual selling price.
Click to expand...
Since my state requires unit price to be shown for certain categories of items, the left corner of the label always has the unit price for certain items while the actual price is in the yellow box.

It’s always fun when a POG has price accuracy labels since sometimes a POG label strip could be regular prices, but now turns into unit price
 
Okay I’ve been gone from target for over a year now . How much did the workload has change in terms of what is a required of a tm to do while set.
Such as are they supposed to de-merch , set , pull , backstock , ppa , salvage etc. I don’t want to know an answer as in ASANTS just straight of what’s the only things they should do.

Back when I was there they were not in charge of de-merch/ re-merch , backstock or pulls.
 
allnew2 said:
Okay I’ve been gone from target for over a year now . How much did the workload has change in terms of what is a required of a tm to do while set.
Such as are they supposed to de-merch , set , pull , backstock , ppa , salvage etc. I don’t want to know an answer as in ASANTS just straight of what’s the only things they should do.

Back when I was there they were not in charge of de-merch/ re-merch , backstock or pulls.
Click to expand...

They've clarified in recent transition guides that pulls and backstock are not apart of the time goals given in Set Workload Calendar. Now whether they should still do the whole process with extra payroll from that workcenter set aside for them or a specific TM should be scheduled probably is more of a ASANTS.

Of course there's also the fact that the new pog guided process launching soon includes everything from ticketing clearance to backstock and pulls as apart of the process.
 
BKop16 said:
They've clarified in recent transition guides that pulls and backstock are not apart of the time goals given in Set Workload Calendar. Now whether they should still do the whole process with extra payroll from that workcenter set aside for them or a specific TM should be scheduled probably is more of a ASANTS.

Of course there's also the fact that the new pog guided process launching soon includes everything from ticketing clearance to backstock and pulls as apart of the process.
Click to expand...
I just want crystal clear direction with this, as I have gone 12 rounds with my ETL on it. I’m tired of them thinking my team (the rag tag people that get scheduled) are “slow”. You can’t give me 50-70% of the hours under SWC and expect all the things. Furniture is an exception. I always look forward to that week because even with the rip off of hours I can do a lot more and help other departments.
 
My store has been slated to start the pilot of Guided POG process. I’ve looked over the guide but wondering what other stores who have been piloting the process think overall. In detail if you can.
 
We are already almost done with the fresh transition, yet we didn’t even get the fixtures in so I know I’ll have to redo a few sections once they come in. We are getting 22 support grids in woohoo…

It has been a fun time, especially since we don’t have enough shelves and it looks like we aren’t getting any after reviewing the lists of fixtures coming ☠️ probably because no one did the walk and audit like they were suppose to.

The displays started to come in for floorcare and I bet my store will misplace those too.
 
Last edited:
Alexbegt said:
We are already almost done with the fresh transition, yet we didn’t even get the fixtures in so I know I’ll have to redo a few sections once they come in. We are getting 22 support girds in woohoo…

It has been a fun time, especially since we don’t have enough shelves and it looks like we aren’t getting any after reviewing the lists of fixtures coming ☠️ probably because no one did the walk and audit like they were suppose to.

The displays started to come in for floorcare and I bet my store will misplace those too.
Click to expand...
Our Fresh transition is in 2 weeks. Doesn’t look fun.
 
Alexbegt said:
Oh ours is too.. we started it last week and are almost done already.

My store loves to work ahead before fixtures and labels even come in and wonder why we have to go back and redo it
Click to expand...
Mine, too. We were explicitly forbidden to set ahead on Storage and Organization, though, on account of a label strip issue, which makes no sense to me. God made drop labels for a reason. And more often than not, my homemade spacing is way, way better than the fantastical spacing given on the label strips.
 
Dead and Khaki said:
Mine, too. We were explicitly forbidden to set ahead on Storage and Organization, though, on account of a label strip issue, which makes no sense to me. God made drop labels for a reason. And more often than not, my homemade spacing is way, way better than the fantastical spacing given on the label strips.
Click to expand...
We were forbidden, too. My TL was setting anyway but not tying anything.
 
Alexbegt said:
We are already almost done with the fresh transition, yet we didn’t even get the fixtures in so I know I’ll have to redo a few sections once they come in. We are getting 22 support girds in woohoo…

It has been a fun time, especially since we don’t have enough shelves and it looks like we aren’t getting any after reviewing the lists of fixtures coming ☠️ probably because no one did the walk and audit like they were suppose to.

The displays started to come in for floorcare and I bet my store will misplace those too.
Click to expand...
PFresh? What's a support gird/grid???
 
Dead and Khaki said:
Mine, too. We were explicitly forbidden to set ahead on Storage and Organization, though, on account of a label strip issue, which makes no sense to me. God made drop labels for a reason. And more often than not, my homemade spacing is way, way better than the fantastical spacing given on the label strips.
Click to expand...

Doesn't HQ know that there's almost always a label strip issue?

(missing labels on REV strips, spacing is incorrect, missing entire label strip for entire shelf, labels don't account for displays, etc..)
 

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Similar threads

N
Presentation
Replies
3
Views
514
Ringwraith917
Ringwraith917
Dead and Khaki
Pricing and Presentation What are we called in the real world?
Replies
8
Views
716
gsa4lyfe
gsa4lyfe
P
Pricing and Presentation Toy resets 2025
2
Replies
25
Views
1K
SigningLady
SigningLady
Walkonmyshoes
  • Locked
Falsely accused of Theft and terminated. Please help.
2 3
Replies
50
Views
2K
commiecorvus
commiecorvus
Dream Baby
Doing Pulls for a POG
2
Replies
27
Views
2K
BKop16
B
Back
Top